DB-IF-60P Bottom-Pull Tissue Packing Machine in Ghana

DB-IF-60P Bottom-Pull Tissue Packing Machine for Ghana in 2023

In 2023, a hygiene paper supplier in Ghana introduced a DB-IF-60P automatic bottom-pull tissue packing machine to add a new packed tissue format to its product range.

Project Background

The customer supplied tissue products to offices, clinics, hospitality businesses, and local distributors. It wanted to introduce bottom-pull tissue packs that could be used with compatible dispensers or placed directly in commercial-use areas.

The folded tissue was already available from the converting section, but manual insertion and sealing did not provide the package consistency required for regular distribution. The customer therefore needed a dedicated packing process matched to the bottom-pull product structure.

Customer Requirement

Unlike a standard soft facial tissue pack, the bottom-pull format requires the tissue stack and package to be oriented correctly so the first sheet can be accessed from the intended outlet position.

Before the machine configuration was confirmed, the following details were reviewed:

• Folded tissue dimensions
• Sheets per pack
• Finished stack height
• Pulling direction of the first sheet
• Bag dimensions and sealing position
• Packaging-film structure
• Feeding and discharge direction
• Factory voltage and compressed-air conditions

The customer also wanted clear operator access because product and bag changes would be completed within the existing workshop.

Equipment Configuration

The DB-IF-60P automatic bottom-pull tissue packing machine was configured around the approved tissue stack and package sample.

Commissioning focused on product feeding, stack positioning, bag opening, product insertion, sealing, and finished-pack discharge. Particular attention was given to keeping the first tissue sheet in the correct position during transfer.

Separate settings were recorded for the main pack sizes because stack height and bag dimensions affected the feeding and sealing adjustments.

Project Result

The new packing machine gave the supplier a dedicated route for producing bottom-pull tissue packs instead of adapting a general manual packing process.

Finished packages became more consistent in shape and sealing position, while the tissue outlet remained easier to identify and inspect. The project also allowed the customer to add a different commercial tissue format without replacing its existing folding equipment.

Buyer Takeaway

For a bottom-pull tissue project, send the actual folded tissue stack and finished package sample. The tissue orientation, first-sheet position, stack dimensions, bag specification, and outlet arrangement should all be confirmed before packing-machine production begins.