The DB-WT-110P automatic wet tissue packing machine is built for automatic bag packaging of mini wet wipes and small tissue packs. It suits converters and tissue producers who need a compact, repeatable packing step for pocket-size wet wipe products rather than manual bag filling.
How the DB-WT-110P Wet Tissue Packing Machine Works
The machine runs a continuous sequence from product infeed to finished pack output:
-
Multi-stage flexible feeding brings the wet wipe stack into the packing position.
-
Film feeding draws the packaging film into the machine.
-
Bag forming shapes the film into an open bag.
-
Bag opening prepares the bag to receive the product.
-
A double-pusher system inserts the product into the opened bag.
-
Sealing closes the filled pack.
-
The finished pack is discharged from the machine.
Because feeding, bag forming, insertion, and sealing are handled in one linked process, the packing step depends less on operator handling and more on correct setup of film, product stack, and pusher timing.
What Buyers Should Confirm Before Ordering
Final configuration depends on the finished pack format, not only on the machine model. Before requesting a quotation, prepare the following details so the supplier can confirm a suitable setup:
|
Decision point
|
What to provide
|
Why it matters
|
|
Product format
|
Mini wet wipe or small tissue pack type, folded size, and stack count
|
Determines feeding and pusher setup
|
|
Pack size
|
Finished bag dimensions and target fill
|
Affects bag forming and sealing setup
|
|
Packaging film
|
Film type and whether printed film is used
|
Influences film feeding and seal quality
|
|
Target output
|
Required packs per minute or per shift
|
Used to confirm a realistic working rate
|
|
Line position
|
Upstream supply and downstream packing or cartoning
|
Defines infeed and outfeed integration
|
|
Utilities and space
|
Power supply, air supply, and available floor area
|
Needed for layout and installation planning
|
Configuration Notes for Wet Wipe Packing
-
Product stack consistency: a stable, evenly stacked wipe count supports reliable feeding and insertion.
-
Film matching: film width and thickness should match the confirmed bag format so forming and sealing stay consistent.
-
Pusher timing: the double-pusher action must be set to the confirmed product size to avoid misaligned insertion.
-
Seal checks: seal temperature, pressure, and dwell time should be verified during commissioning against the chosen film.
-
Maintenance access: plan clear space around feeding, sealing, and discharge areas for routine cleaning and adjustment.
Common Buyer Questions
Can the machine run printed packaging film?
Printed film questions usually come down to film type, print registration, and seal behavior. Confirm the exact film with the supplier before ordering. Related reading: printed film on pocket tissue packing machines.
What information is needed for an accurate quotation?
Provide the product type, folded size, stack count, finished bag dimensions, film type, target output, and available floor space. These details let the supplier confirm a matching configuration instead of quoting a generic unit.
How can I see the machine running?
Request running video or a demonstration of the feeding, bag forming, insertion, and sealing sequence for a product format close to your own.
Send us your wet wipe format, finished bag size, film type, target output, and factory layout. Our team can confirm a suitable DB-WT-110P configuration and the technical details you need for project planning.
Tel: +8613908196540
Email: info@doubletissuemachine.com
MP/WhatsApp: +8613908196540
Manufacturer Address:Dongguan, Guangdong, China
